Magewell Ultra Encode
Tascam US-1x2HR
Rp2.300.000
1Mic, 2IN/2OUT High Resolution Versatile USB Audio Interface
US-1x2HR
For guitar/vocal recording musicians
1 XLR mic input and 1 TRS line/guitar input audio interface with 192 kHz support and USB-C bus power connection. The included loopback function and OBS support makes this interface an excellent choice for podcasts and live streaming. The new US-1x2HR offers simple and intuitive operation, sophisticated looks, a rich assortment of software bundles, and improved audio performance, thanks to the newly enhanced audio circuit.
Spec description
| Sampling frequency | 44.1k/48k/88.2k/96k/176.4k/192k Hz |
| Quantization bit rate | 24bit |
| Analog audio inputs | |
| MIC IN (IN 1) | |
| Connector | XLR-3-31(1:GND, 2:HOT, 3:COLD), BALANCED |
| Input impedance | 2.４k ohms |
| Maximum input level (GAIN:MIN) | +9dBu (2.183Vrms) |
| Gain | 58dB |
| LINE/INST IN(IN 2) | |
| LINE IN | |
| Connector | 6.3mm(1/4″) TRS-jack(T:HOT, R:COLD, S:GND), BALANCED * When set to “LINE” at LINE/INST switch |
| Input impedance | 10k ohms |
| Maximum input level (GAIN:MIN) | +20dBu(7.75Vrms) |
| Gain | 45dB |
| INST IN | |
| Connector | 6.3mm(1/4″) TS-jack(T:HOT, S:GND), UNBALANCED * When set to “INST” at LINE/INST switch |
| Input impedance | 1M ohms or more |
| Maximum input level (GAIN:MIN) | +3dBV(1.1425Vrms) |
| Gain | 45dB |
| LINE L/R IN | |
| Connector | RCA pin-jack, UNBALANCED |
| Input impedance | 10k ohms |
| Maximum input level | +6dBV(1.9953Vrms) |
| Analog audio outputs | |
| LINE OUT | |
| Connector | RCA pin-jack, UNBALANCED |
| Output impedance | 100 ohms |
| Maximum output level | +6dBV (1.995Vrms) |
| PHONES | |
| Connector | 6.3mm(1/4″) stereo phone jack |
| Maximum output level | 18mW+18mW or more (THD+N 0.1% or less, 32ohms loaded) |
| Output impedance | 66ohms |
| Working impedance | 16ohms to 250ohms |
| Control IN / OUT | |
| USB | |
| Connector | USB Type-C |
| Format | USB2.0 HIGH SPEED (480Mbps) |
| DC IN 5V | |
| Connector | USB Micro B type |
| Power | |
| When connected PC | USB bus powered |
| When connected iOS | USB power adapter (that can supply 5V and a current of at least 700mA)*1 External battery pack (that can supply 5V and a current of at least 700 mA)*2*1 We strongly recommend using TASCAM PS-P520E AC adapter or the USB power adapter included with the iPad/iPhone. No USB power adapter is included with an iPod touch. To use it with an iPod touch, purchase a genuine Apple USB power adapter (that can supply 5V and a current of at least 700mA) separately. *2 We strongly recommend using a TASCAM BP-6AA external battery pack. If using another external battery pack or mobile battery, purchase one that can supply 5V and a current of at least 700mA. |
| Power consumption | 1.8W |
| Dimensions | 146(W) × 55(H) × 120(D)mm (including protrusions) |
| Weight | 623g |
| Operating temperature | 5 to 35°C |
| Accessories | USB cable (Type-A to Type-C), Set of DAW software installation guides, Set of DAW plug-in software installation guides, Owner’s Manual (including warranty) |
Audio performance
| Mic amp EIN (equivalent input noise) | -128dBu or less (150ohm termination with gain knob at MAX) |
| Frequency response | |
| MIC IN 1 | |
| 44.1k/48k Hz | 20Hz to 20kHz, +0dB/-0.4dB(JEITA) |
| 88.2k/96k Hz | 20Hz to 40kHz, +0dB/-0.4dB(JEITA) |
| LINE IN 2 | |
| 44.1k/48k Hz | 20Hz to 20kHz, +0dB/-0.3dB(JEITA) |
| 88.2k/96k Hz | 20Hz to 40kHz, +0dB/-0.3dB(JEITA) |
| LINE OUT | |
| 44.1k/48k Hz | 20Hz to 20kHz, +0.2dB/-0.4dB(JEITA) |
| 88.2k/96k Hz | 20Hz to 40kHz, +0.2dB/-0.4dB(JEITA) |
| THD + N | 0.0013% (MIC IN, 1kHz sine wave, -5dBFS input, GAIN knob at minimum, 20kHz SPCL LPF) |
| 0.0027% (LINE IN, 1kHz sine wave, -5dBFS input, GAIN knob at minimum, 20kHz SPCL LPF) | |
| 0.0015% (LINE OUT, 1kHz sine wave, -4dBFS input, MONITOR knob at maximum, 20kHz SPCL LPF) | |
| S/N ratio | 109dB (MIC IN, GAIN knob at minimum, 20kHz SPCL LPF+A-Weight) |
| 105dB (LINE IN, GAIN knob at minimum, 20kHz SPCL LPF+A-Weight) | |
| 110dB (LINE OUT, MONITOR knob at maximum, 20kHz SPCL LPF+A-Weight) | |
| Crosstalk | 95dB or more (MIC/LINE IN to LINE OUT, 1kHz sine wave, GAIN knob at minimum) |
Computer system requirements
Windows
| Compatible computers | Windows computer with a USB 2.0 (or higher) port |
| CPU type/speed | 2GHz or faster dual core processor (x86) |
| Memory | 2GB or more |
| Driver |  ASIO2.0, WDM |
Mac
| Compatible computers | Mac with a USB 2.0 (or higher) port |
| CPU type/speed | 2GHz or faster dual core processor |
| Memory | 2GB or more |
| Driver | Core Audio |
* Verified with Intel and Apple Silicon (M1 and M2) hardware
iOS/iPadOS divice
| Driver | Core Audio |
* To connect an iOS device that has a Lightning connector, a genuine Apple Lightning to USB Camera Adapter (sold separately) is necessary.
Supported OS’
Windows
Windows 10 2022 Update (Version 22H2) New , Windows 11 2022 Update (Version 22H2) New , Windows 11 , Windows 10 (November 2021 Update) , Windows 10 (May 2021 Update) , Windows 10 (October 2020 Update) , Windows 8.1 , Windows 7
Mac
macOS Ventura New , macOS Monterey , macOS Big Sur , macOS Catalina , macOS Mojave , macOS High Sierra (10.13)
iOS
iPadOS 16 New , iOS 15 , iPadOS 15 , iPadOS 14 , iOS 14 , iPadOS 13 , iOS 13 , iOS 12
