Roland Go:Keys & Go:Piano
Audio Technica AT-LP3
Rp5.400.000
AT-LP3 Fully Automatic Belt-Drive Stereo Turntable
- Fully automatic belt-drive turntable operation with two speeds: 33-1/3, 45 RPM
- Balanced straight tone arm with hydraulically damped lift control and rest
- Built-in switchable phono/line pre-amplifier with attached dual RCA output cable
- Switchable pre-amp modes for moving magnet and moving coil cartridges
- ½" mount universal headshell with AT91R Dual Moving Magnet phono cartridge and long-life diamond stylus
- Anti-resonance, die-cast aluminum platter with 4 mm thick rubber mat
- Damped base construction for reduced low-frequency feedback coloration
- Includes 45 RPM adapter and removable hinged dust cover
- Available in black (AT-LP3BK) and white (AT-LP3WH)
| Turntable | |
|---|---|
| Type | Fully Automatic, Belt-Drive |
| Motor | DC motor |
| Speeds | 33-1/3 RPM, 45 RPM |
| Turntable Platter | Die-cast aluminium |
| Wow and Flutter | Less than 0.2% WRMS (33 1/3 RPM) at3kHz |
| Signal-to-Noise Ratio | > 60 dB |
| Output Level | “PHONO” (MM) 3.5mV nominal at 1kHz, 5cm/sec “LINE” (MC) 220mV nominal at 1kHz, 5cm/sec |
| Phono Pre-Amp Gain | 36dB nominal, RIAA equalised 56dB nominal, RIAA equalised |
| Power Supply Requirements | 220 to 240 V / 50, 60 Hz |
| Dimensions | 435 mm ×353 mm×128 mm (W×D×H) |
| Weight | 5.2kg |
| Accessories Included | Rubber mat, Dust cover, Platter (with drive belt), Counterweight, AT-HS3 Headshell with AT91R VM stereo cartridge, 45 RPM adapter, Power cable |
