HIFIMAN – HE R-10P Planar Closeback Headphone
Rp28.000.000
HiFiMAN HE-R10P Closed-Back Planar Magnetic Headphones
The HiFiMAN HE-R10P is a flagship closed-back planar magnetic headphone designed to combine the speed and low distortion of HIFIMAN planar technology with the isolation, physical bass presence and focused presentation of a sealed wooden enclosure.
Unlike most of HIFIMAN’s reference planar headphones, the HE-R10P uses a fully closed-back acoustic chamber built around large sculpted wooden earcups.
With a frequency response of 10Hz–60kHz, 30Ω impedance and 100dB sensitivity, the HE-R10P is considerably easier to drive than several traditional reference planar headphones while retaining the large diaphragm architecture associated with HIFIMAN’s high-end designs.
A Rare Closed-Back HIFIMAN Flagship
The HiFiMAN HE-R10P occupies an unusual place in the HIFIMAN range. Most of the company’s reference planar magnetic headphones use an open-back architecture, allowing sound waves to radiate freely from both sides of the diaphragm. The HE-R10P takes the opposite approach, enclosing the rear of the planar driver inside a substantial wooden acoustic chamber. This gives the headphone a more isolated and physically grounded presentation while preserving the speed and resolution expected from a large planar magnetic transducer.
Planar Magnetic Driver Technology
At the heart of the HE-R10P is a large planar magnetic driver. Instead of using a conventional dynamic voice coil attached to a cone or dome, the conductive elements are distributed across a thin diaphragm. Driving a large surface area in this way allows the diaphragm to respond rapidly and uniformly to the incoming music signal. The result is low moving mass, fast transient response and strong control across the audible spectrum.
Stealth Magnet Architecture
The current HE-R10P is listed by HIFIMAN as the Planar Version with Stealth Magnets. Stealth Magnets are shaped to reduce acoustic turbulence and diffraction as sound waves pass through the magnetic structure. The objective is to minimise interference around the diaphragm so that fine spatial information and transient detail remain intact.
HiFiMAN HE-R10P Specifications
- Type: Closed-back planar magnetic headphones
- Driver: Planar magnetic
- Magnet technology: Stealth Magnets
- Acoustic design: Closed-back
- Frequency response: 10Hz – 60kHz
- Impedance: 30Ω
- Sensitivity: 100dB
- Weight: approximately 460g
- Headphone input: 3.5mm TRRS balanced
- Ear cups: Wooden closed-back chambers
- Included cable: 3m 4-pin XLR balanced
- Included cable: 3m 6.35mm
- Included cable: 1.5m 3.5mm
