Description
SA3 series is Audiocenter latest active DSP-controlled Loudspeaker with high performance and high quality/price ratio. SA3 is built with BrainCore™ which analyses and processes the input signal, DSP module and Class D amplifier optimally, improving the audio performance of the system significantly.
Built-in wireless bluetooth makes various bluetooth devices can be linked to SA3 easily and get the audio output.
SA3 is designed for fixed installation and touring performance, such as multi-functional conference room, house of worship, museum, wedding, lecture, DJ, stage monitor , etc.
Two combo inputs CH A (1-way XLR and Mono jack 6.35) are available in SA310, which can be switched between line input and microphone input. The audio port CH B(Mono jack 6.35 or a RCA port) is for the other sound resources like MP3, CD player, etc. There is 1-way signal input port for wireless bluetooth in it and the volume is controlled by terminal. The gain of CH A/CH B signal input is controlled by independent knob and 1-way master volume control knob. The four different audio sources can be parallel output with one-way XLR after mixed internally, and then sent to different speakers for sound distribution.
SA310 can be installed by steel wire. It can also be ground standing by coupling bar or three-feet stand. The pole mount is 35mm. Various accessories are offered for SA310 to meet different kinds of installs.
| Type |
Active DSP-controlled full range loudspeaker |
| Frequency Response(-6dB anechoic chamber) |
57Hz-20KHz |
| Maximum Calculated SPL/1M |
130dB |
| LF Driver |
Customized Audiocenter ferrite driver, 2” voice coil |
| HF Driver |
Customized Audiocenter ferrite driver, 1” exit, 1.75” voice coil |
| Horizontal Coverage Angle(Symmetrical) |
90° |
| Vertical Coverage Angle(Symmetrical) |
60° |
| AMPLIFIER |
| Amplifier Circuitry |
Class D |
| Power(Peak) |
2000W |
| Frequency Response(1W 8Ω 2ch) |
20Hz-20KHz(±0.5dB) |
| Intermodulation Distortion |
＜0.05% |
| Total Harmonic Distortion |
＜0.05% |
| Protection |
DC protection, short circuit protection, overheat protection, input overload protection, output overload protection, soft startup protection, overvoltage protection, undervoltage protection |
| Cooling System |
Cooling with fans, air convection |
| DSP |
| Processor |
96KHz signal sampling frequency,
24bit precision |
| Presets |
Adjustable via the knobs on the back panel |
| Crossover |
Controlled by DSP |
| Output/Input |
|
| Signal Input |
1×NEUTRIK® female XLR(Mono jack 6.35), 1×Mono jack 6.35,1×RCA,1×wireless Bluetooth |
| Signal Output |
1×NEUTRIK® male XLR |
| Power Input |
3 pin plug |
| Working Voltage |
100V-130V/60Hz or 220V-240V/50Hz |
| Cabinet |
| Cabinet Material |
CNC made of excellent wood |
| Cabinet Color |
Black is standard and default color. Consult with Audiocenter sales team for other customized colors |
| Pole Mount |
Φ35mm |
| Dimension(W×H×D) |
296x530x312mm |
| Net Weight |
14.5Kg |
Two combo inputs CH A (1-way XLR and Mono jack 6.35) are available in SA312, which can be switched between line input and microphone input. The audio port CH B(Mono jack 6.35 or a RCA port) is for the other sound resources like MP3, CD player, etc. There is 1-way signal input port for wireless bluetooth in it and the volume is controlled by terminal. The gain of CH A/CH B signal input is controlled by independent knob and 1-way master volume control knob. The four different audio sources can be parallel output with one-way XLR after mixed internally, and then sent to different speakers for sound distribution.
SA312 can be installed by steel wire. It can also be ground standing by coupling bar or three-feet stand. The pole mount is 35mm. Various accessories are offered for SA312 to meet different kinds of installs.
| Type |
Active DSP-controlled full range loudspeaker |
| Frequency Response (-6dB anechoic chamber) |
48Hz-20KHz |
| Maximum Calculated SPL/1M |
132dB |
| LF Driver |
Customized Audiocenterferrite driver, 3” voice coil |
| HF Driver |
Customized Audiocenter ferrite driver, 1” exit, 1.75” voice coil |
| Horizontal Coverage Angle(Symmetrical) |
60° |
| Vertical Coverage Angle(Symmetrical) |
40° |
| AMPLIFIER |
| Amplifier Circuitry |
Class D |
| Power(Peak) |
2000W |
| Frequency Response(1W 8Ω 2ch) |
20Hz-20KHz(±0.5dB) |
| Intermodulation Distortion |
＜0.05% |
| Total Harmonic Distortion |
＜0.05% |
| Protection |
DC protection, short circuit protection, overheat protection, input overload protection, output overload protection, soft startup protection, overvoltage protection, undervoltage protection |
| Cooling System |
Cooling with fans, air convection |
| DSP |
| Processor |
96KHz signal sampling frequency,
24bit precision |
| Presets |
Adjustable via the knobs on the back panel |
| Crossover |
Controlled by DSP |
| Output/Input |
|
| Signal Input |
1×NEUTRIK® female XLR(Mono jack 6.35), 1×Mono jack 6.35,1×RCA,1×wireless Bluetooth |
| Signal Output |
1×NEUTRIK® male XLR |
| Power Input |
3 pin plug |
| Working Voltage |
100V-130V/60Hz or 220V-240V/50Hz |
| Cabinet |
| Cabinet Material |
CNC made of excellent wood |
| Cabinet Color |
Black is standard and default color. Consult with Audiocenter sales team for other customized colors |
| Pole Mount |
Φ35mm |
| Dimension(W×H×D) |
356×608×372mm |
| Net Weight |
20.0Kg |
Two combo inputs CH A (1-way XLR and Mono jack 6.35) are available in SA315, which can be switched between line input and microphone input. The audio port CH B(Mono jack 6.35 or a RCA port) is for the other sound resources like MP3, CD player, etc. There is 1-way signal input port for wireless bluetooth in it and the volume is controlled by terminal. The gain of CH A/CH B signal input is controlled by
independent knob and 1-way master volume control knob. The four different audio sources can be parallel output with one-way XLR after mixed internally, and then sent to different speakers for sound distribution.
SA315 can be installed by steel wire. It can also be standing by coupling bar or three-feet stand. The pole mount is 35mm. Various accessories are offered for SA315 to meet different kinds of installs.
| Type |
Active DSP-controlled full range loudspeaker |
| Frequency Response (-6dB anechoic chamber) |
44Hz-20KHz |
| Maximum Calculated SPL/1M |
134dB |
| LF Driver |
Customized Audiocenterferrite driver, 3” voice coil |
| HF Driver |
Customized Audiocenter ferrite driver, 1” exit, 1.75” voice coil |
| Horizontal Coverage Angle(Symmetrical) |
60° |
| Vertical Coverage Angle(Symmetrical) |
40° |
| AMPLIFIER |
| Amplifier Circuitry |
Class D |
| Power(Peak) |
2000W |
| Frequency Response(1W 8Ω 2ch) |
20Hz-20KHz(±0.5dB) |
| Intermodulation Distortion |
＜0.05% |
| Total Harmonic Distortion |
＜0.05% |
| Protection |
DC protection, short circuit protection, overheat protection, input overload protection, output overload protection, soft startup protection, overvoltage protection, undervoltage protection |
| Cooling System |
Cooling with fans, air convection |
| DSP |
| Processor |
96KHz signal sampling frequency,24bit precision |
| Presets |
Adjustable via the knobs on the back panel |
| Crossover |
Controlled by DSP |
| Output/Input |
|
| Signal Input |
1×NEUTRIK® female XLR(Mono jack 6.35), 1×Mono jack 6.35,1×RCA,1×wireless Bluetooth |
| Signal Output |
1×NEUTRIK® male XLR |
| Power Input |
3 pin plug |
| Working Voltage |
100V-130V/60Hz or 220V-240V/50Hz |
| Cabinet |
| Cabinet Material |
CNC made of excellent wood |
| Cabinet Color |
Black is standard and default color. Consult with Audiocenter sales team for other customized colors |
| Pole Mount |
Φ35mm |
| Dimension(W×H×D) |
439×760×454mm |
| Net Weight |
27.0Kg |
3 low-pass filters (80Hz, 100Hz, 120Hz) in SA3118 are available to choose according to different venues and music styles. There is also phase switch. All connectors and function buttons are on the back panel.
SA3118 subwoofer is with 1-way XLR for input and output. Signals can be sent to different speakers for sound distribution.
| Type |
Active DSP-controlled Compact subwoofer |
| Frequency Response(-6dB anechoic chamber) |
35Hz-150Hz |
| Maximum Calculated SPL/1M |
134dB |
| LF Driver |
Customized Aduicocenter ferrite driver, 4” voice coil |
| AMPLIFIER |
| Amplifier Circuitry |
Class D |
| Power(Peak) |
2000W |
| Frequency Response(1W 8Ω 2ch) |
20Hz-6KHz(±0.5dB) |
| Intermodulation Distortion |
＜0.05% |
| Total Harmonic Distortion |
＜0.05% |
| Protection |
DC protection, short circuit protection, overheat protection, input overload protection, output overload protection, soft startup protection, overvoltage protection, undervoltage protection |
| Cooling System |
Cooling with fans, air convection |
| DSP |
| Processor |
96KHz signal sampling frequency,24bit precision |
| Presets |
80Hz,100Hz,120Hz |
| Crossover |
Controlled by DSP |
| Output/Input |
|
| Signal Input |
1×NEUTRIK® female XLR |
| Signal Output |
1×NEUTRIK® male XLR |
| Power Input |
3 pin plug |
| Working Voltage |
100V-130V/60Hz or 220V-240V/50Hz |
| Cabinet |
| Cabinet Material |
CNC made of excellent wood |
| Cabinet Color |
Black is standard and default color. Consult with Audiocenter sales team for other customized colors |
| Pole Mount |
M20 base Φ35mm |
| Dimension(W×H×D) |
520x700x618mm |
| Net Weight |
43.0Kg |
3 low-pass filters (80Hz, 100Hz, 120Hz) in SA3218 are available to choose according to different venues and music styles. There is also phase switch. All connectors and function buttons are on the back panel.
SA3218 subwoofer is with 1-way XLR for input and output. Signals can be sent to different speakers for sound distribution.
| Type |
Active DSP-controlled Compact subwoofer |
| Frequency Response(-6dB anechoic chamber) |
35Hz-150Hz |
| Maximum Calculated SPL/1M |
140dB |
| LF Driver |
Customized Audiocenterferrite driver, 4” voice coil |
| AMPLIFIER |
| Amplifier Circuitry |
Class D |
| Power(Peak) |
4000W |
| Frequency Response(1W 8Ω 2ch) |
20Hz-6KHz(±0.5dB) |
| Intermodulation Distortion |
＜0.05% |
| Total Harmonic Distortion |
＜0.05% |
| Protection |
DC protection, short circuit protection, overheat protection, input overload protection, output overload protection, soft startup protection, overvoltage protection, undervoltage protection |
| Cooling System |
Cooling with fans, air convection |
| DSP |
| Processor |
96KHz signal sampling frequency, 24bit precision |
| Presets |
80Hz,100Hz,120Hz |
| Crossover |
Controlled by DSP |
| Output/Input |
|
| Signal Input |
1×NEUTRIK® female XLR |
| Signal Output |
1×NEUTRIK® male XLR |
| Power Input |
3 pin plug |
| Working Voltage |
100V-130V/60Hz or 220V-240V/50Hz |
| Cabinet |
| Cabinet Material |
CNC made of excellent wood |
| Cabinet Color |
Black is standard and default color. Consult with Audiocenter sales team for other customized colors |
| Pole Mount |
M20 base Φ35mm |
| Dimension(W×H×D) |
988×520×714mm |
| Net Weight |
70.0Kg |
