Dynaudio monitors are designed to speak the truth so you get exactly what you need: an exact reproduction of your mix. Great mixing derives from attention to detail while striving for a final mix that goes way beyond the sum of its parts. We believe that the same principle applies when designing ultimate monitors.
Utmost care in selection of materials and production combined with the industry’s most thorough and extensive testing program allow our monitors to achieve 100 percent consistency – not just between different pairs, but also when crossing pairs or relying on pairs in different locations.
And due to our unique driver technology our monitors are neutral and uncolored. The smooth clarity in combination with the outstanding dynamic capabilities of our monitors ensure that you can work long hours without ear fatigue.
LYD 5
The LYD 5 is our premium small-format near-field monitor. With its low volume precision, LYD is the perfect fit for smaller setups and home studios. LYD uses lightweight aluminium wire and voice coils in its handmade drive units, along with a state-of-the-art Class-D amplifier with a 96 kHz / 24bit signal path and DSP used just right to provide outstanding performance.
The aluminium voice coil and wire are low mass so its transient response is quick and accurate. To ensure the ideal mix between stiffness, weight, and dampening for unrivalled accuracy, we mould the diaphragm and dust cap in one piece with our proprietary Magnesium Silicate Polymer.
Features
Nearfield Monitor with 5″ Woofer
Bi-amped speaker design with 2 x 50W and state-of-the-art Class-D amplification
Bass extension to extend or curtail the low end frequency response
Two different tunings: one for free standing and one designed for speakers within 50 cm of wall
Sound balance to influence the overall response of the speaker
Made in Denmark
Specifications
Nearfield monitor with 5” woofer
Max. SPL (1m, pair): 106dB
Crossover Freq.: 5200 Hz
Freq. Response of 50Hz – 22kHz
HF 50W/LF 50W Class-D amplification
Bass Extension
Position switch
Sound Balance
LYD 7
The new LYD 7 uses advanced Digital Signal Processing to extend or curtail the low-frequency response by 10 Hz where need while both Position and Sound Balance ensure better performance in any environment.
Compared to its smaller sized sibling, the LYD 7’s larger woofer helps extends bass response.
A ferrit magnet system with vented pole piece for accurate driver control. Large diameter voice coil surrounds the magnet for superior linearity. The aluminium voice coil and wire are low mass so its transient response is quick and accurate. To ensure the ideal mix between stiffness, weight, and dampening for unrivalled accuracy, we mould the diaphragm and dust cap in one piece with our proprietary Magnesium Silicate Polymer.
Features
Nearfield Monitor with 7″ Woofer
Bi-amped speaker design with 2 x 50W and state-of-the-art Class-D amplification
Bass extension to extend or curtail the low end frequency response
Two different tunings: one for free standing and one designed for speakers within 50 cm of wall
Sound balance to influence the overall response of the speaker
Made in Denmark
Specifications
Nearfield monitor with 7” woofer
Max. SPL (1m, pair): 109dB
Crossover freq.: 4300 Hz
Freq. Response of 45Hz – 22kHz
HF 50W/LF 50W Class-D amplification
Bass Extension
Position switch
Sound Balance
LYD 8
The LYD series is a redefinition of our previous professional products, and LYD 8 is the biggest of them all. With its 8” MSP woofer and advanced DSP, the LYD 8 provides outstanding performance and a low-end precision you won’t believe. Perfect for smaller studios and home setups.
A ferrit magnet system with vented pole piece for accurate driver control. Large diameter voice coil surrounds the magnet for superior linearity. The aluminium voice coil and wire are low mass so its transient response is quick and accurate. To ensure the ideal mix between stiffness, weight, and dampening for unrivalled accuracy, we mould the diaphragm and dust cap in one piece with our proprietary Magnesium Silicate Polymer.
Features
Nearfield monitor with 8” woofer
Max. SPL (1m, pair): 112dB
Crossover Freq.: 3900 Hz
Freq. Response.: 45Hz – 22kHz
HF 50W/LF 80W Class-D amplification
Bass extension
Position switch
Sound Balance
Specifications
Nearfield Monitor with 8″ Woofer
Bi-amped speaker design with 50W HF/80W LF and state-of-the-art Class-D amplification
Bass extension to extend or curtail the low end frequency response
Two different tunings: one for free standing and one designed for speakers within 50 cm of wall
Sound balance to influence the overall response of the speaker
Made in Denmark
LYD48
This 3-way near- to midfield monitor reaches eyebrow-raising levels of accuracy thanks to a new soft-dome tweeter and Dynaudio’s proprietary MSP midrange driver and woofer. Each driver is fuelled by a powerful, state-of-the-art Class-D amplifier and a full 24-bit/96kHz signal path. And, like the rest of the LYD range, it lets you fine-tune low frequency response, position and sound-balance using cutting-edge DSP.
